V-Tech

V-Tech

Anti-Freeze

R 55.00

Antifreeze Summer Coolant  

Composition

  • 60% Mono Ethylene Ester based blend with protection to -6° at a mix ratio of 1:3 with vehicle in motion.
  • Lime and Silica Based Organic Phosphate Ester Product.

Please Note:

Floating particles or a slight discolouration may be noticed in the liquid after storage and prior to use, which is acceptable.This does not affect the Performance, Quality or Composition of the product and will not damage any cooling system.

These particles will dissipate once the coolant has heated up to normal engine operating temperature

Safety

  • Keep out of reach of children and uninformed persons
  • If ingested seek medical attention immediately
  • If splashed in eyes, rinse with copious amounts of water

Storage

  • Store in original container, out of direct sunlight
  • Store in dry, cool areas

First Aid Measures

  • Skin: Wash copiously with soap and water remove contaminated clothing and launder before re-use. If ski irritation develops seek immediate medical attention.
  • Eyes: As soon as possible irrigate thoroughly with water for at least 15 minutes, holding eyelids apart. If in any doubt, or the irritation persists obtain medical attention.
  • Ingestion: In the event of deliberate ingestion, help must be obtained urgently. Keep at rest. Do not induce vomiting but seek prompt medical attention. Observe patient in case abdominal pain develops, or patient starts to vomit. Try to keep patient conscious and try to make certain that the patient does not aspirate vomit into lungs. Do not wash contamination  into drains and waterways. Allow to dry and then sweep/shovel into refuse bins and dispose of via public or private waste disposal.

Accidental Release Measures 

  • Small scale spillages: In the unlikely event of spillages from bottles, place bottles in bags. Bottles must be disposed of in a land fill or in accordance with local regulations.
  • Large scale spillages: In the event of large roadside transport spillages resulting from collision or overturned vehicles, vehicles must be kept away from contaminated roads or surfaces. Affected areas should be covered in layers of sawdust or similarly absorbent material. Do not wash into drains, waterways or soil courses. Later remove absorbent material to waste disposal site. Marine spillages should be dealt with in accordance with pollutant procedures which are relevant to the product classification and IMDG codes.

Copper High Temp RTV

R 225.00

Copper High Temp RTV
High temp resistance up to 370 C
Low volatile formula
Safe for all models
300 g

Grey Professional Silicone Gasket Maker

R 65.00

Grey Professional Silicone Gasket Maker
ly designed for high torque, high vibration applications such as import engines that requiring a unigue RTY gasket.
It makes reliable ' Formed in Place ' gaskets that resist cracking, shrinking and migration caused by thermal cycling.
It features low odour, -corrosive with excelllent oil restance. Guaranteed no leak.
It is permanently flexible and stable at temperature between -80'F to 625'F intermittent.
It also highly resistant to auto and shop fluids.

Metal Polish

R 50.00

Metal Polish
Vitalsol
30 g
Vitalsol is an All Purpose metal polish ly formulated using the best available materials to polish,clean and protect all bright metal surfaces.
It contains powerful yet gentle abrasive property thus make it ideal for restoring the shine of heavily weathered and corroded surfaces.
It also contains high quality wax that provides exceptional shine and leaves behind an invisible wax coating that is water repellent and protects against finger prints,contamination and futher corrosion.
Vitalsol is water dispersible thus allowing easy cleaning and reuse of polishing cloths.

Red RTV Silicone Gasket Maker

R 50.00

Red RTV Silicone Gasket Maker
Is a orginal gasket maker formulated for high temperture and heavy duty applications. It makes reliable "Formed-in-place" gaskets that resist cracking, shrinking and migration caused by thermal cycling. Ideal to replace almost any cut gasket.
Also use to coats pre-cut gaskets to increase reliability.
It is permanently flexible and stable at temperture of between -80'F to +650'F intermittent.
It is also highly resistant to auto and shop fluids.

V-Tech Aquafix All purpose Putty

R 55.00

V-Tech Aquafix All purpose Putty
Size: 56.8g
A fast-setting , fibreglass-reinforced polymer compound that enable permanent repairs to many surfaces including :
Fibreglass, concrete,ceramic,glass,metals,wood and many plastics
it is ly formulated to adhere surfaces exposed to damp, wet or underwater conditions.
Each handy stick contains pre-measured portions of activator and base throughout , no measuring or mixing tools are necessary.
It contains fading blue dying that becomes white after mixing.
The consistency allows eliminates drips and runs.
Allows the material to be shaped and formed as need before curing.
Once cured it can be drilled ,screwd,filed,carved,sanded or painted

V-tech Rapid Steel Putty

R 50.00

V-Tech Rapid Steel Putty
Size: 56.8g
A hand mixable, steel reinforced, epoxy putty that mixes in just one minute to provide fast repairs to items made of ferrous and aluminium Metals.
It comes in a handy "tootsie roll" form, contains pre-measured portions of activator and base throughout with the curing agent encapsulated in the consistency eliminates drips and runs providing "no mess" application machined, ground, filed or painted.
It won't rust, shrink or pullaway.
It is resistant to water, temperature extremes, and chemicals such as hydrocarbons, ketones,alcohols,ester,halocarbons,aqueous salt solutions and dilute acids and bases.
Ideal for repair on ferrous metals.

V-Tech Valve Grinding Paste

R 65.00

V-Tech Valve Grinding Paste

Fine and Course
Size: 100g

V-Tech Vital Clear RTV

R 50.00

V-Tech Vital Clear RTV
100% silicone Sealant- 85g
It makes reliable "formed-in-place" gasket that resist cracking,shrinking,and migration caused by thermal cycling.
Ideal to replace almost any cut gasket.
Also use to seals,bonds,repairs,mends and securesglass,metal,plastics,fabric,vinyl, weather stripping and vinyl tops.
Instruction on pack

V-Tech Vital Red RTV

R 30.00

V-Tech Vital Red RTV
Size: 32g
Silicone Gasket Maker 650'F
Red RTV is the original gasket maker formulated for high temperature and heavy duty application.
It makes reliable "formed-in-place" gasket that resist cracking, shrinking and migration caused by thermal cycling.
Ideal to replace almost any cut gasket
Also use to coat pre-cut gaskets to increase reliability.
it is permanently flexible and stable at temperature of between -80'F to +650'F intermittent.
It is also high resistant to auto and shop fluids.
Instruction on pack